Container houses are a new type of activity room made of steel, sandwich panels, aluminum alloys, tiles, glass, paint and other materials that introduce modern home design concepts.

During the use of container houses, it is necessary to pay attention to moisture-proofing. Since some of them are filled with cotton, good moisture-proofing effect should be achieved through the construction of the movable house walls.

1. The horizontal connection of cotton and cotton is connected together by stapler binding.

2. Edge the glass wool and install the wall color steel plate.

3. Cut off the glass wool roll felt at a point where it exceeds the wall purlin by 20 cm and fix it with double-sided tape.

4. With the veneer facing the indoor side, roll from the eaves to the corner of the wall, and fix the glass roll felt to the lower purlin with double-sided tape, leaving 20 cm more.

In addition, the construction of container houses must also be based on project needs. In order to avoid the formation of cold bridges, some hard insulation materials can be considered on the label pad during roof construction.

Keep the glass wool felt aligned and the joints between the rolls tight during installation. When longitudinal overlap is required, the above measures should be taken to better solve the moisture-proof problem.

This is the end of the introduction to the measures to prevent moisture in the Container houses. If you have any questions or suggestions, you can call our service hotline at any time and our staff will serve you wholeheartedly.